SKF Shaft Alignment Tool TKSA 40
The intuitive laser shaft alignment tool allows
results to be stored and shared
Intuitive: • Animated graphical interface on
a 4 inch back-lit screen and alphanumeric
key functions simplify the whole process
Alignment actions displayed: • Clear “real–
time” coupling and feet values, given
during the alignment process, makes
alignment corrections quick and easy
Built-in alignment recommendation: •
Pre and user definable tolerance tables
greatly simplify assessment of the
alignment
Alignment data sharing: • Alignment
settings and results can be stored to the
internal memory and downloaded via
USB cable to a PC. Files are easily shared
with others without the need of special
software.
Soft foot check: • “Soft foot” function helps
check if the machine is standing evenly on
all feet; an essential check for good shaft
alignment
The TKSA 40 is intuitive in operation, thanks to its animated
graphical interface. Not only is it quick and easy to use, but
alignment results can be stored and shared using a USB cable
via the PC. Compared to traditional methods, the shaft
alignment process is greatly simplified; just follow the
instructions on the screen to make a perfect alignment.
Easy pre–alignment: • For machines that
are grossly misaligned, the laser lines and
scales enable rapid pre–alignment
Fast measuring unit positioning: •
Measuring units are positioned fast and
easy, by using the built-in spirit levels
Global use: • Language free menus and
user selectable measurement units (mm
or inch) facilitate use globally
Easy for all users: • A quick start guide and
intuitive menus allows virtually any
technician to quickly be familiar with the
process. Full multi-lingual instructions are
supplied on a CD® SKF is a registered trademark of the SKF Group.
© SKF Group 2010
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written
permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can
be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
MP/PDS TKSA40 EN · November 2010
www.mapro.skf.com · skf.com/mount · skf.com/lubrication
Designation TKSA 40
Applications Horizontal single coupling alignment, soft foot
check, tolerance check, storage of results
Measuring units:
Housing material ABS plastic
Type of laser Diode laser
Laser wave length 670 - 675 nm
Laser class 2
Maximum laser power 1 mW
Distance between measuring units brackets Maximum: 1000 mm (3.3 ft)
Minimum: 70 mm (2.7 in)
Type of detectors Single axis PSD, 8,5 × 0,9 mm (0.3 × 0.04 in)
Cable length 1,6 m (5.2 ft)
Dimensions 87 × 79 × 39 mm (3.4 × 3.1 × 1.5 in)
Weight 210 gram (7.3 oz)
Display unit:
Housing material ABS plastic
Display type 10 cm (4 in) monochrome backlit screen
Screen protection Hard plastic
Battery type 3 x 1,5V LR14 Alkaline
Operating time 20 hours continuous
PC connection USB
Displayed resolution 0,01 mm (1 mil in inch mode)
Dimensions 210 × 110 × 50 mm (8.3 × 4.3 × 2 in)
Weight 650 gram (22.9 oz)
Complete system:
Contents Display unit (batteries included)
2 measuring units with spirit levels
2 mechanical shaft fixtures
2 locking chains with tightening pin
Measuring tape
USB cable
Quick Start Guide
Calibration certificate valid for 2 years
CD with instructions for use and
instructional video
Carrying case
PC download Plug in to PC by USB socket
Memory 100 alignments
Softfoot check Yes
Alignment tolerance check Yes
User editable tolerances Yes
Shaft diameter range 30 - 500 mm
Chain included for shaft diameters 30 - 150 mm (1.2 - 5.9 in)
Optional chain for shaft diameters 150 - 500 mm (5.9 - 20 in)
Accuracy of system < 2% ± 0,01 mm
Temperature range 0 - 40 °C (32 - 104 °F)
Operating humidity < 90 %
Carrying case dimensions 390 × 310 × 192 mm (15.4 × 12.2 × 7.6 in)
Total weight (incl. case) 4,9 kg (10.8 lbs)
Warranty 1 year
Technical data
Entering dimensions
Live adjustment
values
Screen guided
instruction
Easy result storage
Intuitive graphical interface